3M 1080 CFS12 Black Carbon Fiber Vinyl Wrap Film
- 3.5 Mil Gloss Cast Wrap Film with Long-term, Gray, Removable, Repositionable, Pressure Activated Adhesive with Non-visible Air Release Channels
- 7 year expected outdoor performance, 3 year vertical and 1 year horizontal warranty period
- The opacity of these films vary and should be considered when installing
- Gloss colors can sometimes have a haze/blotchiness/mottling that can usually be eliminated with heat. Even the shipping box can create surface impressions that can also be eliminated with heat
- Invisible air release channels assure fast and easy virtually bubble-free applications
- No overlaminate required.
- Watercraft graphics applied above static water line only
- Caution: Always pre-test vinyl installation on vehicles. Do not install if there is any adverse or negative impact on sensors and/or other safety-related equipment on the intended vehicle.
- Warning: During installation it is critical to prevent “dragging” the adhesive side of wrap vinyls over edges and flat surfaces. Abrasion caused by dragging can result in “adhesive dots” or “sanding” under the surface of the vinyl and make it appear to have many small bumps. This is usually not repairable. For more information and installation advice, please view the video below titled “Avoid Dots/Adhesive lines”.